Being quiet is one of the most vital aspects of bowhunting. The Bodnik Whisper Flemish twist bow string offers Fast Flightâ„¢ performance with deadly silence. Utilizing a proprietary blend of three different high performance bow string materials, the Whisper bow string is like a gun silencer for ...traditional bows! Your prey will never know what hit them! You'll enjoy all the advantages of Fast Flightâ„¢ bow strings with smooth performance and super quiet shots. The Whisper bow string features reinforced loops to protect your bow. The center serving ensures a nice, snug fit for your arrow nock. 10 strands. Colors vary. Available in actual string lengths of 45", 47", 49", 51", 53", 55", 57", 59", and 61". Please specify. Measure the bow string you have and round up to the nearest full inch. These strings will stretch a bit as they are broken in. If you don't know the length of your bow string a good rule of thumb is that longbow will take a string 3" shorter than they are marked and a recurve takes a 4" shorter bow string. So, if your bow is a recurve and is marked AMO 60", a 56" bow string should fit. NOTE: High Performance string material is not recommended for all bows. Please check with your bow's manufacturer to see if your bow is rated "Fast Flight compatible." For older bows or ones you cannot confirm are compatible, we recommend B-50 string material. Flemish strings are made of several strands of string material twisted upon themselves. It is possible for the area by the string loops to appear to be fraying. This is common and is not damaging to the string. To remove the fraying rub your hand on the strands to lay them down. The wax in the string will hold the strands down, but may appear after some use. You can trim the fraying strands, but this is not recommended. If the wax is not holding the stands down, you can apply some String Makers Wax to the area.
Read moreWith a simple yet effective design, this quality Leather String Keeper is... read more
The Lazer Traditional HP Longbow bow strings utilize modern features and function... read more
These 14 strand B-50 bow strings feature an endless loop design makes... read more
This 15 strand three bundle Flemish twist string is constructed from the... read more
This handy string separating tool is just what busy archers need for... read more
Just get a standard Flemish string
As a bow hunter I try to make my setup as quite as possible so I decided to give this string a try, after four months and 500-1000 arrows it still hasn't stopped creeping and I had to re-serve the middle serving, not because of too much abrasion but because it was so loosely wound around the string it began sliding up and down leaving gaps in the serving as far as sound goes I can't… read more honestly say I see a huge difference in it vs standard Flemishtwist ff string, will probably just buy standard ff Flemish string in the future
Not bad
I'm using this on a Martin savannah stealth. Stretch is minimal, but creep lasts a few days. Took about 4-5 days for creep to settle down. Center serving is on the small side, but useable. The bcy-x has an even smaller center serving....b50 is much tighter fit. I'm pleased with the speed and sound of this string. It is quiet and sends my arrows down range at a nice clip.… read more Overall pleased. Wish center serving was a tad larger
Yes this string is good up to 70#
Yes
Yes, this string would be safe on a Bear Grizzly.
The only string you can use on a Bear Grizzly is B55/B50.
I would go B55 if it is older or newer D97 strings
You will need a 59" string you generally subtract 3" from the AMO .
You will need a 48" B55. Avoid high performance strings like Whisper or D97
Yes that is the length you will need .
Generally a recurve string has a larger loop on one end to accommodate the wider limbs and the long bow string the loops are usually the same sive .
Id go with the 57" string.
This string would be too skinny for Gold Tip nocks