Nock Collars Review
Featured Deal
Nock Collars
New
From $13.99
Get DealNock Collars
Tired of arrow nocks flying off while stump shooting or breaking arrows by striking another arrow's nock at target practice? Is the jackhammer effect of arrow Weight Tubes causing your nocks to shoot out? Arrow Nock Collars are the perfect solution! They keep your nock in place and protect your c...arbon arrows from splitting or cracking from other arrow impacts. We have relabelled our sizing of nock collars so they apply to more arrow brands. Please use the charts below as a guide. Collars weigh approximately 5 grains each. Sold by the dozen only. The Inside Diameter (ID) of each nock collar is listed so you may match it up with your arrow shafts Outside Diameter (OD). All collars will have a tolerance of +.001", but will not be under. It is recommended to epoxy nock collars in place, it fills in any space between the collar and the shaft due to tolerance differences. Note: The outside diameter of the Arrow Dynamics wood grain shafting varies by a few 1000ths due to the wood grain graphic wrap. Therefore some point collars will slide on, and some will require more pressure to install. On the tighter ones, use sandpaper to sand over the leading Outside Diameter edge of the cut to length shaft, start the carbon collar, then apply pressure against a hard surface to push the collar on. Do not over apply pressure as you can break your carbon shaft. Charts are subject to shaft and collar tolerance differences. Nock Collar ID (in inches) A .275" B .293" C .300" D .305"
Read more
MSRP:
$13.99
$13.99
Used Price:
$9.79
$9.79
Sale Price:
$12.59
$12.59
Nock Collars For Sale
Most Popular Arrow Building
Gold Tip Ballistic Collar System
Reinforce your Gold Tip Traditional Classic and Traditional Classic XT carbon arrows... read more
$25.99
100%
100%
Black Eagle M Micro-Nocks (dozen)
The Black Eagle "M" Micro-Nock is 100% Polycarbonate. Sturdy and dependable, it's... read more
$12.99
Not Rated
Not Rated
Burt Coyote Lumenok® Lighted Push-In Nocks
All new HD Orange! 30% brighter than previous models. Featuring new and... read more
$29.99
Not Rated
Not Rated
NOCKturnal™ Lighted Push-In Nocks
The NOCKturnal™ lighted nock is a breakthrough design that is more affordable... read more
$29.99
90%
90%
Goat Tuff Impact Glue
Bowhunters and target shooters expect a lot from their arrows. That's why... read more
$15.99
80%
80%
Nock Collars Reviews
These are not a gimmick; they work
NoSystem
7 years ago
I am a very active traditional 3D/target archer. I have been using nock and carbon collars on my arrows (Traditional Only and Gold Tips) for years. I have seen a lot of arrows cracked/shattered on the rebar skeletons in 3D targets. Since I started using these collars, it is a genuine rarity for me to lose an arrow this way. The field tip may be flattened like a table and the nock… read more dislodged, but the shaft is fine. Earlier today, one of my shooting partners robin hooded one of my Gold Tips; put it squarely through the nock and into the shaft. (See the pic.) After wrenching the tip/insert and ruined nock out, the arrow was perfectly serviceable. I would not feel entirely comfortable shooting without these.
Nocks don't fit unless forced in
KL
8 years ago
I purchased these in Size B and C within the last few months for my Gold Tip Warriors and my Gold Tip Hunter XT's both in 400 and 500 spines. The size B nock collars fit the 500 spine arrow shaft very well, the size C's are way too loose for the 400 spines, and I noticed that the .246 GT Nocks do not fit unless forced in. Once forced in, the nock does not come out unless you shave… read more off all of the little ridges or unless you force it out by pulling it with plier (which ruins your nock). This is extremely frustrating. I have since resorted to trying to find Carbon Express collars that fit the GT arrows. The collars for the Mayhem Hunter 250 fits the Gold Tip Hunter XT 400's perfectly, and the GT nocks fit too. Haven't yet found any that fits the Hunter XT 500's.
Good and easy to fix
Zafirsuperstar
9 years ago
Protects my arrows efficiently
Haven't failed me yet!!
Cwag
10 years ago
These are great!!! I use to split the backs of my gold tips all the time at 3d shoots. Since I have been using these I have never lost an arrow to splitting at the knock. I build all my arrows with some eye appeal so I wish they came In a variety of colors.
Better than a footed arrow!!!!!
Sam
11 years ago
Extremely good service, with prompt delivery.
Nock collars
Happy Howard
12 years ago
The arrow nock collars seem to be a good quality. and it has a nice touch to the appearance.
Great accessory for your carbon arrows
Spartanhunter
12 years ago
I use these nock collars on my carbon arrows and they do a good job of protecting the arrows from damage. They also look nice and are easy to instal. I use size B collars for 9/32 inch carbon shafts and they fit nice and tight and no glue is needed.
Collars are great product
Tragomvuka
13 years ago
A few days ago I received my order, I am very pleased with the collars, I just want to put a big objection. On this planet there are people who use Gold Tip Traditional and has a lot of us. How difficult is to make collars for Traditional GT?
Prevent shaft fracturing
TrogPLX
13 years ago
These are basically the exact same thing as the nock collars. I ordered both, and I can't tell the difference in either. They do the job of preventing splitting of the nock end of the carbon shaft. They didn't really prevent the nock from flying out when you hit something slightly harder though. I ended up having to glue in the nocks, or carry around a pocket full of them. … read more If you are shooting semi hard stumps with carbons, you should have these on your arrows.
Nock Collars Questions and Answers
Asked by
Brian
3 years ago
What size will fit the easton carbon legacy 400's?
At this time, there is not a size that will fit that shaft.
3 years ago
At this time, there is not a size that will fit that shaft.
Asked by
Marc
4 years ago
I have Beman; ICS Hunter; Pro Carbon Arrows 9/32 diameter. What collars would fit them?
The 400 spine take a B collar and the 340 and 300 spine take a C
3 years ago
The 400 spine take a B collar and the 340 and 300 spine take a C collar .
Asked by
Henry
4 years ago
Can you please tell me which would fit the Black eagle Vintage 600 spine.
Nock Collar B will fit that arrow.
4 years ago
Nock Collar B will fit that arrow.
Asked by
coy
5 years ago
what size nock collars do i need for easton axis 5 mm shafts
We would not have a nock collar that fits that shaft unfortunate
5 years ago
We would not have a nock collar that fits that shaft unfortunately
Asked by
Recurve
5 years ago
I'm using gold tip xt traditionals 340 spine what size do I need
We do not have a collar that fits that shaft unfortunately
5 years ago
We do not have a collar that fits that shaft unfortunately
Asked by
Jim
6 years ago
I have Easton 5mm Full Metal Jacket shafts, 300 spine. Are these compatible with that shaft, and if so, which size do you recommend?
The nock collars will not fit the back end of those shafts. You
6 years ago
The nock collars will not fit the back end of those shafts. You can use the point collars that fit the front end if you really wanted to strengthen the back end of the shaft.
Asked by
Charles
6 years ago
Nock collar size for Goldtip 600 Ultralight?
It looks like that arrows OD would be .283" and the closest I wo
6 years ago
It looks like that arrows OD would be .283" and the closest I would have would be the .275"
Asked by
Gregg
6 years ago
I shoot gold tip 600 what size nock collar do I need ?
For the gold tip traditional 600 spine you would need size C.
6 years ago
For the gold tip traditional 600 spine you would need size C.
Asked by
Kevin
6 years ago
What size would fit 500 spine fleetwood 6788X?
We do not offer an exact fit for these arrows unfortunately
6 years ago
We do not offer an exact fit for these arrows unfortunately
Size b would fit the 500 spine.
6 years ago
Size b would fit the 500 spine.
Asked by
Kevin
6 years ago
I shoot goldtip traditional 500's. Which size would I need.
You would need size C
6 years ago
You would need size C