DAS Bows Risers Review
Featured Deal
DAS Bows Risers
New
From $449.99
Get DealDAS Bows Risers
Now offered in a Type III Hard Coat Anodize Finish or DuraCoat® Finish An anodize finish is extremely durable, won't chip or peel like paint, and offers resistance for corrosion, wear, and abrasion. A hard coat (Type III) is thicker than standard anodizing for more durability and a smoother finis...h. NOTE: Colors are not as consistent as those obtained from a flim dip. Anodize finish is offered in black or copper in model lengths of 21", 17", or 15". DuraCoat® offers the same kind of durable, dependable protection you get from industrial firearms finishes. You'll benefit from increased impact resistance, as well as protection from corrosion and age. Your Dalaa® riser will last lifetimes longer. DuraCoat® finish is offered in sniper green in model lengths of 21", 17", or 15". Recent Upgrades to Dalaa® 17" and 21" Risers With the new anodized and DuraCoat® risers there is now a scribed center line on the shelf and belly of the risers to aid with checking alignment of limbs and tuning arrows to centershot. For the 21" Dalaa® riser a 3rd plunger hole has been added, and the front stabilizer hole has been upgraded with a stainless steel bushing. The DAS Bows™ Risers Offer Something for Everyone All are offered in our DAS™ Limb Connection to be unmatched in performance while also no-tools takedown and quiet. Work with ILF limbs by either changing limb bushing (recommended) or swapping the DAS™ riser limb pads for ILF limb pads. American Engineered and backed by 3Rivers 100% Satisfaction Guarantee. You will love how your DAS™ bow shoots, or we'll take it back. DAS™ bows have unlimited tuning options to match a bow to your shooting needs and to your arrows. Great bow for compound shooters that still want to use their old gear and enjoy tuning a bow to be perfectly tuned to shoot tight groups at fast speeds. Our Dalaa® Riser (pronounced: Da-Laa) offers maximum versatility in a modern recurve. The riser is cut 3/8" past center (adjustable side plate included), a highly radiused shelf allows shooting off the shelf or use of a plunger and elevated rest. Dalaa® risers work with both recurve and longbow limbs. Every Dalaa® riser is tapped for ATA accessory (also known as AMO sight inserts), plunger (triple tapped on 21" riser), and front stabilizer inserts to accept almost anything you would want to mount to your riser from quivers, stabilizers, sights, elevated rests, bow fishing reels, or Whatever you want! The DX5 Riser is a combination of recurve technology and longbow design to create the ultimate modern longbow. The riser is cut 5/16" past center with adjustable side plate included. Shelf is radiused to allow shooting off the shelf or use of a plunger and elevated rest. Use with DAS™ longbow limbs for maximum longbow performance or DAS™ recurve limbs for a a sleek looking recurve at shorter lengths. Tapped for ATA accessory (AMO sight), dual plunger, and front stabilizer inserts to accept any accessory item you would like.
Read moreArchery Deals Score
Deals (3)
Popularity: 6961
MSRP:
$449.99
$449.99
Used Price:
$314.99
$314.99
Sale Price:
$404.99
$404.99
DAS Bows Risers For Sale
Most Popular Bows
Leather String Keeper
With a simple yet effective design, this quality Leather String Keeper is... read more
$8.50
60%
60%
Lazer Traditional HP Longbow Bow String
The Lazer Traditional HP Longbow bow strings utilize modern features and function... read more
$31.99
86%
86%
SF Axiom Bow String
These 14 strand B-50 bow strings feature an endless loop design makes... read more
$15.99
Not Rated
Not Rated
BCY-X Bow String
This 15 strand three bundle Flemish twist string is constructed from the... read more
$35.99
86%
86%
String Separation Tool
This handy string separating tool is just what busy archers need for... read more
$10.99
60%
60%
DAS Bows Risers Reviews
Love this system!
GComeau
5 years ago
Really love this system! Came from a Howatt one piece longbow. Love being able to adjust my bow to my arrows. Allows me a broader range of tuning. I'm able to use arrows I might not have been able to tune to my one piece. Configured with 50lb foam core DAS longbow limbs. The setup is laser accurate and very smooth. I'm just going to sell my Howatt. This bow shoots so well… read more for me that my search is over. Very satisfied with this purchase!
Tough and accurate!
Ggeeman
5 years ago
This riser was extremely adjustable. I really loved the ability to change hand grips, poundage as needed as well as many other adjustments. The only real drawback to this bow is that it is extremely heavy. I would not take this bow on a backpacking hunting trip.
Best 21" on the market!
Mo0se
6 years ago
I've owned several DAS 21" Risers over the years and have had great success with all of them. I used a Nat Gear one for two years at the World Championships. If you want a bow that can be truly tuned to just you specifically, this is the one to buy. The new improvements make an already great riser fantastic! Stable, completely adjustable and quiet. Its the best 21" riser available… read more today.
Great Shooter - Not so pretty!
FT
8 years ago
Hands down one of the quietest and solid feeling bow I have ever shot! Exceptional in that regard. The fit and finish leaves you wanting! I have seen far better fit and finish on ILF Risers from Win & Win and Fivics in the same price range. Screws and fittings are steel and in a humid environment will rust! Burs on a number of the holes drilled into the riser! Paint shows… read more a bit of orange peel in the sight window. I bought the bow to shoot barebow and believe I will be pleased with it in the long run. 3Rivers needs to step up their Quality Control and makes some improvements to deserve a 5 Star Rating.
Best System Ever...beats ILF Hands Down
Ivorycollector
12 years ago
Mainly Field Archery - 3D and Paper Should be excellent for hunting too
Potential but mine was less than good
Steve the disappointed
12 years ago
Potentially nice riser but came with some flaws. I should have returned it, but I went ahead and shot it. There is a scratch to the bare metal in one of the limb pockets. There is residue (adhesive) on the side of the riser by one of the limb pockets. One of the grip screw holes is mis-threaded. Mine came with a bare metal plunger screw instead of the black one shown in the picture,… read more ugly. I might recommend it, but with reservations...
17" Das Dalaa Riser
Grandpasj
12 years ago
I have come full circle in my quest for the perfect riser. 2 Yrs ago had a 17" Dalaa riser and sold it. I've tried every ILF/mutiple lengths/Das (21")riser with every conceivable limb combo since and I'm back to the Dalaa 17" riser. I have the Dalaa med. carbon foam LB limbs on this riser making a 60" #45 bow. Quiet, fast, light and accurate. My only wish is that the natural gear… read more camo was still available as I prefer it to the lost camo. The thing that sets this riser apart is its geometery. Most others have less deflex and I can say the deflex is perfect on this riser making for a much more forgiving bow!
My first DAS
DarrellRN
12 years ago
I have shot owned several recurves and this is by far my favorite. Last year my uncle loaned me his Dalaa to take on a hunt. I didn't get a shot on that hunt but I put a lot of arrows through that bow in preparation. when I tried to go back to shooting my own bows I couldn't believe the difference and began trying to sell my previous bows in order to buy this one. I have not… read more been disappointed. After a little tuning, I'm shooting the tightest groups (off a traditional bow) of my life. I will be shooting my first 3-D tournament with this bow next weekend and look forward to beating my brother with it. Now if only I can get a few deer to walk by this fall.
Great Riser but pricey
GVDocHoliday
13 years ago
Just got a DX5 riser. I have the riser it's designed was base off of and the DAS connection is a vast improvement. My only complaint is the price...based on amount of machining, simple design, and raw stock used, this riser should not cost more than the 17" Dalaa, and in fact should be nearly [$]+ less. I'd for sure recommend it to a friend, but only if they can get a good… read more deal used.
Dalaa 21" riser
Shihan Thomas
13 years ago
Got my Dalaa 21" riser in the mail today. Very nice riser, clean and simple. I made a string and plugged my ILF longbow limbs in and started shooting at ten yards in the garage right away. I love it, going to the range tonight to shoot and show off my new custom bow.
DAS Bows Risers Questions and Answers
Asked by
Erik
5 years ago
What are the differences between the various grip options?: Dalaa PolyGrip Dalaa 2.0 Dalaa 3.0 DX5 PolyGrip Additionally how should I know what suits me better between the Low, Standard, or High style of grip? Without knowing I'm inclined to select Stan
I use the 2.0 grip after trying the Medium for several years, it
5 years ago
I use the 2.0 grip after trying the Medium for several years, it felt better. I am able to get better back tension and bone on bone alignment with the bow arm. Tried a Torque free Jaeger grip designed by Kisk Lee and it is a high wrist grip.The low wrist 2.0 gives me stronger feel during the shot. It may change your look a bit but a ew shots will fix that. I just rebuilt my from from the ground up after 28 years of erratic shooting. I am shooting the 2.0 Ultra Low Grip on both my 17" and 21" Dalaa riser. It is similar to my Hummingbird Long bow and is somewhat similar to the locator grip on my Howard Hill Longbow. I am 74 years old and the Low Wrist Grip helped me cure 15 year of Target Panic along with a Formaster trainer and shooting everyday for five months. Both Dalaa Risers are Longbows by the way. Picture is my 17" riser with the low grip. Shots were at 25 yards.
Asked by
Zane
2 years ago
Will the 17" riser pair well with longbow limbs?
Yes will make a nice 62" bow on long limbs or a 64" with x-longs
2 years ago
Yes will make a nice 62" bow on long limbs or a 64" with x-longs limbs.
Asked by
Oz Gonzo
3 years ago
Will there be another copper DX5 run?
At this time, there is not. We do have 1 left Copper DX5 Riser l
3 years ago
At this time, there is not. We do have 1 left Copper DX5 Riser left in stock Right Hand only
Asked by
Thomas
3 years ago
How much does the Das 17 riser weigh with ILF plates? Is it is different than the weight with Das plates?
Asked by
Froy
3 years ago
What material is the side plates made of? Would you recommend a 17 or 21? I'm currently shooting a tradtech 19 in wood riser and wanted to get a heavier bow and more tuning capability for 3d and hunting. My draw length is 26. Thank you so much.
Asked by
Jesse
3 years ago
I love the grip on my Hoyt Buffalo. Which Grip is similar to a Hoyt Buffalo?
I don't have any Buffalo recurves around the shop anymore, but c
3 years ago
I don't have any Buffalo recurves around the shop anymore, but comparing to a Hoyt Satori (model that replaced the Buffalo) I'd say a low grip is my personal recommendation to what would be most similar to that grip.
Asked by
Randy
4 years ago
what limbs fit the DX5 riser recurve....?
You can use any of the DAS line limbs, recurve or longbow.
4 years ago
You can use any of the DAS line limbs, recurve or longbow.
Asked by
Walter alward
4 years ago
Look for a das riser would be good for 3d and hunting I have a 26 draw was wondering if one work better at my draw length
I would recommend a 17" riser for your draw length it will be mo
4 years ago
I would recommend a 17" riser for your draw length it will be more forgiving and depending on the limbs more versatile .
Asked by
Ariel
4 years ago
can the DAS 15 be converted into ILF?
The DAS 15 cannot be converted to ILF. Only the 17 and 19s can u
4 years ago
The DAS 15 cannot be converted to ILF. Only the 17 and 19s can use the DAS ILF Limb Pads.
As I understand it it requires switching out the mounting plates
4 years ago
As I understand it it requires switching out the mounting plates on the riser. Warren
Asked by
Erik
5 years ago
What are the differences between the various grip options?: Dalaa PolyGrip Dalaa 2.0 Dalaa 3.0 DX5 PolyGrip Additionally how should I know what suits me better between the Low, Standard, or High style of grip? Without knowing I'm inclined to select Stan
I use the 2.0 grip after trying the Medium for several years, it
5 years ago
I use the 2.0 grip after trying the Medium for several years, it felt better. I am able to get better back tension and bone on bone alignment with the bow arm. Tried a Torque free Jaeger grip designed by Kisk Lee and it is a high wrist grip.The low wrist 2.0 gives me stronger feel during the shot. It may change your look a bit but a ew shots will fix that. I just rebuilt my from from the ground up after 28 years of erratic shooting. I am shooting the 2.0 Ultra Low Grip on both my 17" and 21" Dalaa riser. It is similar to my Hummingbird Long bow and is somewhat similar to the locator grip on my Howard Hill Longbow. I am 74 years old and the Low Wrist Grip helped me cure 15 year of Target Panic along with a Formaster trainer and shooting everyday for five months. Both Dalaa Risers are Longbows by the way. Picture is my 17" riser with the low grip. Shots were at 25 yards.
Asked by
LuisRG
5 years ago
For BareBow target shooting, What DAS setup could be used? I presently shoot a 70'' 25# recurve with a 28.5 draw length.
Depending on the regulations of the competition, you should be a
5 years ago
Depending on the regulations of the competition, you should be able to to use any of the DAS set-up combinations.