DAS 3K Carbon Bamboo Core Recurve Limbs Review

DAS™ has harnessed the power of bamboo and carbon to create a recurve limb that's a lightweight heavy-hitter. Using dual bamboo laminations and surrounding them with 3K carbon layers gives you a combo that is lightweight and powerful. 3K carbon is considered the "workhorse" of carbon fibers d...ue to its light weight and relative stiffness as compared to other carbon fibers. Bamboo is known for its strength and elasticity, giving you quick recovery and superior power. Pair these powerful recurve limbs with any DAS™ or ILF riser for an unbeatable bow. Recurve limbs give you a more compact bow, with the added advantages of speed and accuracy. The reinforced tips let you shoot with today's high performance bow strings. Comes with felt-lined limb sleeves with Velcro® closure for storage. Offered in both DAS™ limb connection and ILF limb connection for the versatility of using with the large selection of DAS™ and ILF bow risers. Choose the limb length of Medium (60" on 17" riser) or Long (62" on 17" riser) in pull weights of 29#, 35#, 40#, 45#, 50#, 55#, or 60# @ 28" (measured on a 17" riser), and the limb connection of DAS™ or ILF. Limbs made from dual laminations of bamboo surrounded by 3K carbon Reinforced limb tips Available in Medium and Long in pull weights of 29#-60# Choose DAS™ or ILF limb connection See all DAS Bows See all ILF Bows Typically with ILF bows the weight will adjust up or down 2# for every 2" of riser length. For example, if a pair of limbs is 40# on a 17" riser, they will be 42# on a 15" riser or 38# on a 19" riser. This is standard for all ILF risers and limbs. Remember that with a traditional bow the weight will change depending upon what your draw length is. Bow weight will change approximately ±2½ pounds for every inch from a bows rated draw length. So a bow rated 45# @ 28" bow is roughly a 42½# @ 27" or 47½# @ 29". Draw weight is marked at the nearest 5# increment to actual weight, (2#'s under and 3#'s over). This is an industry wide standard. Bow stringer not included. A bow stringer is recommended for stringing any recurve bow or longbow. Stringing a bow without a bow stringer, or stringing it backwards will void a bow's warranty. Click here to see our Bow Stringers. It is recommended to unstring your bow if you do not plan to be shooting more than week. Store your bow on its side, or hanging vertically from a peg. Never rest the bow on the lower tip for extended periods of time. Never dry fire the bow (shooting without an arrow). Read about Longbow and Recurve Set-up